Introducing
the CD-ROM Blaster iNFRA52X AudioXcel, the drive that performs
Digital Audio Extraction of exceptional quality. The iNFRA52X is
ideal for ripping audio CD tracks for creating digital audio
files, such as MP3s or WAVs. An Intelligent Control adjusts the
rate of Digital Audio Extraction, giving you clean and crisp
digital audio even with CDs that are not brand new.
Features:
Creative iNFRA52X AudioXcel Drive Gives You Quality Ripping
Creative iNFRA52X AudioXcel drive is specially designed to play
and rip audio tracks crisply and cleanly, eliminating the 'pops'
and 'crackles' in the playback of the ripped files. Even if the
audio CD is covered with slight fingerprints, scratches, stains or
has deteriorated with time, Creative iNFRA52X AudioXcel drive can
play and rip without any distortion to the music.
Blazing 20X Ripping Speed (Turbo mode) While other drives in
the market rip your audio tracks at a slow 4X or 8X speed,
Creative iNFRA52X AudioXcel drive gives you upto a blazing 20X
(max) ripping speed in turbo mode. In short, this drive rips your
audio CDs in a flash!
Built-in Intelligent Control for the Best Quality Rip at
Optimum Speed Most drives rip tracks at a fixed speed without
performing any error checks. This can compromise the quality of
the source during extraction, causing "noise" during
playback.
Creative iNFRA52X AudioXcel drive has a built-in intellignet
control that constantly checks for errors when reading the audio
tracks. When an error is detected (e.g. due to scratches), the
drive automatically switches to a lower speed, allowing it to read
the data more accurately, hence producing clean and clear tracks
without any pops and crackles. By adjusting the ripping speed to
Normal mode, Creative iNFRA52X AudioXcel drive can then playback
and rip the "bad" audio CDs that many other drives
cannot perform.
System
Requirements:
Pentium 100MHz or higher - Pentium II 233MHz recommended for
DAE
8MB free hard disk space (or more for the bundled software)
8MB RAM (16MB recommended)
3.5", 1.44MB floppy drive
Microsoft® Windows® 95 or Windows® 98
Available Enhanced IDE connector on motherboard
Available half-height drive bay (drive rails may be required
for some systems)
Creative MediaRing Talk™ requires Windows® 95 or Windows®
98, connection to the Internet at 28.8Kbps and a microphone
Creative LAVA!™ requires a 300MHz Pentium II processor, 64MB
RAM, and a 3D accelerator or 2D/3D display card with minimum
16-bit display, OpenGL support and at least 8MB memory
|